stock777 2 Report post Posted January 15 Seeing an issue with the latest beta , very high constant cpu use. 30-40% on a 4 core. Turned off all ports so only some charts running , didn't make a diff. How do we narrow down what thread is causing this . For reference, Im running TOS and TWS an both use 1/2 the cpu (<20 each) Quote Share this post Link to post Share on other sites
slowflyer 0 Report post Posted January 15 Saw this and checked mine...IB/MT. MT showing, under power usage/trend, VERY HIGH...don't think I'd seen that before. MT using 12-20% CPU. Only other program open is TWS. Quote Share this post Link to post Share on other sites
stock777 2 Report post Posted January 15 Thanks slowflyer Quote Share this post Link to post Share on other sites
slowflyer 0 Report post Posted January 15 Hmmm...second thought, I might not have a higher than usual CPU %, since I'm rarely above 20%. Though still getting that "very high" power usage/trend, highlighted in reddish color. Haven't seen that before, as far I as I know. Will see what Jerry comes up with. Quote Share this post Link to post Share on other sites
Jerry Medved 325 Report post Posted January 15 please send me the log - can't really comment without seeing that Quote Share this post Link to post Share on other sites
stock777 2 Report post Posted January 15 will do, market is closed now (4:30) still seeing constant spikes , so we know its not the quote stream (at least not the volume of quotes) Quote Share this post Link to post Share on other sites
slowflyer 0 Report post Posted January 16 CPU % for me was fine, having too much charts etc. open. Thanks for checking, Jerry! Quote Share this post Link to post Share on other sites
stock777 2 Report post Posted January 16 see anything Jerry ? something I can try on my end to narrow it down ? Quote Share this post Link to post Share on other sites
Jerry Medved 325 Report post Posted January 16 I emailed you last night with an update. did you get it? Quote Share this post Link to post Share on other sites
stock777 2 Report post Posted January 16 didnt check my email. will do that now Quote Share this post Link to post Share on other sites
stock777 2 Report post Posted January 16 no , that wasnt it . Did some debugging , seems to be related directly to the chart performance setting . Have to bring it down to below 50% to get decent cpu usage. Quote Share this post Link to post Share on other sites
Jerry Medved 325 Report post Posted January 16 please resend the log Quote Share this post Link to post Share on other sites
stock777 2 Report post Posted January 28 (edited) I made some changes to the Vwap SD settings , used 360 , not 999 Seems to have reduced to usage some Is there some way you could do a Current DAY SD that would be optimized for low cpu use ? Edited January 28 by stock777 Quote Share this post Link to post Share on other sites