[historical backfill]

Found it. My mistake.  Disregard.

[historical backfill]

Historical backfill seems to be missing.  It used to be right beside/below OHLC backfill.

[elder force index and all other lines]

I forgot another way to prevent or minimize prices being hidden under other prices.  Make the problem intraday charts  some percentage less than a minute wide.  Ex.  0.1 minute/6 seconds wide.  Have that chart peak out from behind other charts.

[elder force index and all other lines]

It's always been a bug with MT. With Elder Force Index, it's  Impossible to get rid of 0.000 inside of yellow price box.  With newest version of MT,  four 0.000 inside yellow boxes are displayed.  So instead of wanting no 0.000 yellow boxes, now there are four that are impossible to get rid of.  Elder Force should work like the other indicators.  If you want a price at 0.000, just put a horizontal line at 0.000 and check the display price box.  All the multiple identical prices are superfluous, redundant, unnecessary, needless, nonessential, uncalled-for, unwarranted, etc.  Please add a global or individual situation box that can be checked to go back to the previous way show price was done before.  If it is so difficult to see overlapping prices, make the chart taller and/or reorder the sort.

[single regression channels]

With the previous Ver. of MT with upper and lower lines  clear, when the center line was moused over, and the upper and lower lines would appear,  right clicking on the center line to pop up the edit parameters box, the upper and lower  white lines,  would remain visible throughout the process. Now  right clicking the center line causes the upper and lower lines to disappear.  Can you make the new ver. MT function like the previous Ver. functioned?  Having the upper and lower lines anything other than clear will triple the number of lines on my already cluttered chart.  If nothing changes, I may use almost background colored upper and lower lines just so they  remain visible while adjusting .   Whats bad is all the lines might converge near the same point.

 

Looked again at the  intraday  and see they now function the  same as the historical when clear is selected for the upper and lower lines.  Mousing over the center line and right clicking makes the upper and lower lines disappear. 

[single regression channels]

Ver 1.1.8500.2 x86   Intraday charts works fine.   Problem only with Historical charts. Single regression channels,  when using edit parameters and selecting width, the width lines disappear.  The only way to move a width line to a specific place on the chart is to:  edit width, close the edit  box, look to see if line is in desired place, and if not, reopen edit box, move line again, rinse, repeat.  Width line needs to remain visible throughout the editing process as it is with the intraday charts and used to be with the historical charts.

[single regression channel]

Single  regression channel of x length.  If you go back in time greater than x amount, the single regression channels encroach on right side  of chart.  Happens with both iintraday and historical charts.

[Elder Force]

The only to see the difference would be to post a previous version of MT screenshot.  I don't have any.  Charts look a little like a consolidated chart.  Like they have a mild case of the jaggies.  Has the way the charts advance horizontally, due to time passing,  been changed? Just a low relative volume day?  Maybe it's a figment of my imagination.  Elder Force appears to be working fine now.

[Elder Force]

They started looking normal at 12.55 EST.   The upper price charts lines  themselves don't look the same as they used to.  Maybe that contributed to the wonky Elder Force.  Are the upper chart price lines consolidated or done differently in the newest version of MT? 

[Elder Force]

It appears the newest version of MT has broken the intraday  Elder Force indicator.

[raw data]

Where are instructions on how to replace the current version of MT with the  previous version.

[raw data]

Raw data time & sales.  "Either the volume of the transaction or the cumulative volume for the stock up to this point - see below"  is gone or moved to where.?  This has been a feature since the beginning of MQT. 

[Vol %]

Granularity until 10:00AM or so.  Much easier than putting the raw data volume into a spreadsheet or a calculator for the calculations.

[Vol %]

In portfolio, could you please add one or two decimal places in Vol% column.

[TDA data]

Information/values in portfolio not updating unless a chart is opened for the symbol. Can easily be seen by looking at Vol% column.   TDA data.  Restarted MT.  Problem still exists. Opened intraday charts for inactive symbols to 'wake them up'.  When intraday charts were closed, updating problem persists. 

[Gap %]

In the portfolio page, if a symbol gaps 0.00%, MT doesn't stabilize that cell. It might be dependent on how the gap % is rounding in the hidden numbers to the right of .00, the cell switches from red 0.00%. to blank cell, to green 0.00%.  SHV symbol does this once a week or so.  Today the SHV gap cell is red 0.00% or blank.  Other gap 0.00% symbols can be found daily by using the Finviz screener and sorting the gap column. How often the cell changes might be dependent on number of trades.  (This may be a MT feature.)

[TYPE Line Tick]

On a chart selecting: Main-TYPE--Line Tick.  When mousing over lines, value indicator box(improper terminology) doesn't appear adjacent to the cursor position.  It could appear anywhere including off the chart to the left. Also, it doesn't correspond  to the value of the cursor location. Works fine on all the other line types, such as Line, Candle, OHLC. MT Version 1.1.1720.2224 x86

[adjust to scale]

Is there any way to adjust to scale either horizontal lines dragged to lower charts or by using the  draw-lines-shift method?  When dragging the horizontal lines to the lower charts, the adjust to scale check box disappears.  If it is possible, can it be done with individual horizontal lines instead of globally?  Example:  You have multiple horizontal lines in one lower chart, but you only want to adjust to scale at zero. 

[Rng%]

MT Ver 1.1.17000.2018 x86  TDA data feed.  Portfolio 'Rng%' col. only shows '%' sign when percentage >=75%(green) or <=25%(red). >25-<75(black) has no '%' sign. Was sketchy on Wed. Described problem occurring on Thur. and Fri.   Insignificant problem.

[TDA data]

'Hit Hist Backfill All button' did the trick.  Thanks.

 

Please ignore axis/axes comment. My bad. Unbeknown to me, axes is the plural of axis.
 

[TDA data]

Using TDA data, Avg. Vol and Vol% columns don't fill/display numbers when opening each day.  To get those columns to fill/display numbers, each individual ETF(and maybe stocks) historical chart needs to be opened.  The data for those two columns must come from the historical charts.  Seems like they should automatically fill without having to open each historical chart. Ver 1.1.17000.2018 x86  Problem was also in previous Ver.

 

Typo in help.  Title-'axes' should be 'axis'.  Also same typo in the header of the help page.
 

[EFI]

Could you please remove the histogram from EFI lower indicator.  This was done in QT with a check box. This allows the EMAs not to be overwhelmed by the histogram.

[TD Ameritrade disabling QuoteTracker.....]

Will the last version of MT that functions with XP, continue to function when using TDA for data?